SCI list
2020
1. Sung-Wan Kim, Jin-Hwan Cheung, Jae-Bong Park, Sung-Ok Na,
“Image-based back analysis for tension estimation of suspension bridge hanger cables”,
Structural Control and Health Monitoring, Vol. 27, No. 4, e2508, 2020.
2. Hae-Yong Park and Sang-Hoon Oh,
“Structural Performance of Beam System with T-stub-Type Slit Damper”,
Eng. Struct. 205 Article 109105. Elsevier, 2020.
3. Kyra Kamille Toledo, Hyoung-Seok Kim, Young-Soo Jeong and In-Tae Kim,
“Residual Compressive Strength of Short Tubular Steel Columns with Artificially Fabricated Local Corrosion Damage”,
Materials, Vol. 13, No. 4, pp. 813-829, 2020.
2019
1. Sung-Wan Kim, Hyoung-Suk Choi, Bub-Gyu Jeon, and Dae-Gi Hahm,
“Low-cycle fatigue behaviors of the elbow in a nuclear power plant piping system using the moment and deformation angle”,
Engineering Failure Analysis, Vol. 96, pp. 348–361, 2019.
2. Sung-Wan Kim, Bub-Gyu Jeon, Min-Kyu Kim, and Dae-Gi Hahm,
“Seismic fragility evaluation of the base-isolated nuclear power plant piping system using the failure criterion based on stress-strain”,
Nuclear Engineering and Technology, Vol. 51. No. 2, pp. 561-572, 2019.
3. Young-Soo Jeong, Eun-Rim Baek, Bub-Gyu Jeon, Sung-Jin Chang and Dong-Uk Park,
“Seismic performance of emergency diesel generator for high frequency motions”,
Nuclear Engineering and Technology, Vol. 51, No. 5, pp. 1470-1476, August. 2019.
4. Hae-Yong Park and Sang-Hoon Oh,
“Design Range of the Damper of a T-stub Damage –Controlled System”,
Journal of Constructional Steel Research, Vol. 162, Article 105719, Elsevier, 2019.
5. Jin-Hee Ahn, Young-Soo Jeong, In-Tae Kim, Seok-Hyeon Jeon, Chan-Hee Park,
“A Method for Estimating Time-Dependent Corrosion Depth of Carbon and Weathering Steel Using an Atmospheric Corrosion Monitor Sensor”,
Sensors, Vol. 19, No. 6, pp. 1416-1424, 2019.
6. Jong-Han Lee, Chi-Young Jung, Tae-Ryeon Woo, Jin-Hwan Cheung,
“Post-yielding tension stiffening of reinforced concrete members using an image analysis method with a consideration of steel ratios”,
Advances in Concrete Construction, Vol. 7, No. 2, pp. 117-126, 2019.
7. Tae-Wan Kim, In-Tae Kim, Ki-Young Seo, Hyun-Jae Park,
“Strength and pore characteristics of OPC-slag cement paste mixed with ployaluminum chloride",
Construction and Building Materials, Vol. 223, No. 1, pp. 616-628, 2019.
2018
1. Sung-Wan Kim, Hyoung-Suk Choi, Bub-Gyu Jeon, Dae-Gi Harm, and Min-Gyu Kim,
“Strain and deformation angle for a steel pipe elbow using image measurement system under In-plane cyclic loading”,
Nuclear Engineering and Technology, Vol. 50, No. 1, pp. 190–202, 2018.
2. Sung-Wan Kim, Hyoung-Suk Choi, Dong-Uk Park, Eun-Rim Baek, and Jae-Min Kim,
“Water level response measurement in a steel cylindrical liquid storage tank using image filter processing under seismic excitation”,
Mechanical Systems and Signal Processing, Vol. 101, pp. 274-291, 2018.
3. Jong-Han Lee, Baik-Soon Cho, Jae-Bong Kim, Kun-Joon Lee, and Chi-Young Jung,
“Shear capacity of cast-in headed anchors in steel fiber-reinforced concrete”,
Engineering Structures, Vol. 171, pp.421–432, May. 2018.
4. Muye Yang, Shigenobu Kainuma, Young-Soo Jeong,
“Structural behavior of orthotropic steel decks with artificial cracks in longitudinal ribs”,
Journal of Constructional Steel Research, Vol. 141. pp. 132-144, 2018.
5. Shigenobu Kainuma, Yuya Yamamoto, Jin-Hee Ahn, Young-Soo Jeong,
“Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer”,
Structural Engineering and Mechanics, Vol 65, No. 2, pp. 191-201, 2018.
6. Shigenobu Kainuma, Muye Yang, Young-Soo Jeong, Susumu Inokuchi, Atsunori Kawabata, Daisuke Uchida,
“Fatigue Behavior Investigation and Stress Analysis for Rib‑to‑Deck Welded Joints in Orthotropic Steel Decks”,
International Journal of Steel Structures, Vol. 18, No. 2, pp. 512-527, 2018.
7. Hyoung-Seok Kim, Duy Kien Dao, Chang-Hee Shin, Young-Soo Jeong, In-Tae Kim,
“Compressive strength evaluation of circular tubular short columns with locally corroded ends”,
Journal of Constructional Steel Research, Vol. 149, pp. 31-40, 2018.
8. Jin-Hee Ahn, Seok-Hyeon Jeon, Young-Soo Jeong, Kwang-Il Cho, Jungwon Huh,
“Evaluation of Residual Compressive Strength and Behavior of Corrosion-Damaged Carbon Steel Tubular Members”,
Materials, Vol. 11, No. 7, pp. 1254-1273, 2018.
9. Duy Kien Dao, Duy Khiem Nguyen, Hyoung-Seok Kim, Young-Soo Jeong, In-Tae Kim,
“A Time-dependent Corrosion Characteristic of a Steel Member in Contact with Concrete”,
International Journal of Steel Structures, Vol. 18, No. 3, pp. 976-992, 2018.
10. Ho-Seob Kim, Young-Soo Jeong, Duy Kien Dao, In-Tae Kim,
“An approach for evaluating tensile strength of painted steel plates from the surface rusting grade”,
Corrosion Engineering, Science and Technology, Vol. 53, No. 7, pp. 510-516, 2018.
11. In-Tae Kim, Ho-Seob Kim, Duy Kien Dao, Jin-Hee Ahn, Young-Soo Jeong,
“Fatigue Resistance Improvement of Welded Joints by Bristle Roll-Brush Grinding”,
International Journal of Steel Structures, Vol. 18, No. 5, pp. 1631-1638, 2018.
12. Kun-Joon Lee, Jong-Han Lee, Chi-Young Jung, Eunsoo Choi,
“Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects”,
Composite Structures, Vol. 202, pp. 710-718, 2018.
2017
1. Sung-Wan Kim, Bub-Gyu Jeon, Jin-Hwan Cheung, Seong-Do Kim, and Jae-Bong Park,
“Stay cable tension estimation using a vision-based monitoring system under various weather conditions”,
Journal of Civil Structural Health Monitoring, Vol. 7, No. 3, pp. 343–357, 2017.
2. Jong-Han Lee, Yong Myung Park, Chi-Young Jung and Jae-Bong Kim,
“Experimental and Measurement Methods for the Small-Scale Model Testing of Lateral and Torsional Stability”,
International Journal of Concrete Structures and Materials, Vol.11, No.2, pp.377–389, June. 2017.
3. Bub-Gyu Jeon, Sung-Wan Kim, Hyoung-Suk Choi, Dong-Uk Park and Nam-Sik Kim,
“A Failure Estimation Method of Steel Pipe Elbows under In-plane Cyclic Loading”,
Nuclear Engineering and Technology, Vol. 49, No. 1, pp. 245-253, February. 2017.
4. In-Tae Kim, Duy Kien Dao, Young-Soo Jeong, Jungwon Huh, Jin-Hee Ahn,
“Effect of corrosion on the tension behavior of painted structural steel members”,
Journal of Constructional Steel Research, Vol. 133, pp. 256-268, 2017.
5. Shigenobu Kainuma, Muye Yang, Young-Soo Jeong, Susumu Inokuchi, Atsunori Kawabata, Daisuke Uchida,
“Experimental investigation for structural parameter effects on fatigue behavior of rib-to-deck welded joints in orthotropic steel decks”,
Engineering Failure Analysis, Vol. 79, pp. 520-537, 2017.
6. Jin-Hee Ahn, Jun Min You, Jungwon Huh, In-Tae Kim, Young-Soo Jeong,
“Residual clamping force of bolt connections caused by sectional damage of nuts”,
Journal of Constructional Steel Research, Vol. 136, pp. 204-214, 2017.
7. Sang-Hyo Kim, Sejun Park, Kun-Soo Kim, Chi-Young Jung,
“Generalized formulation for shear resistance on Y-type perfobond rib shear connectors”,
Journal of Constructional Steel Research, Vol. 128, pp. 245-260, 2017.
8. Sang-Hyo Kim, Kun-Soo Kim, Sejun Park, Chi-Young Jung, Jae-Gu Choi,
“Comparison of hysteretic performance of stubby Y-type perfobond rib”,
Engineering Structures, Vol. 147, pp. 114-124, 2017.
9. Jong-Han Lee, Chi-Young Jung, Eunsoo Choi, Jin-Hwan Cheung,
“Vision-based multipoint measurement systems for structural in-plane and out-of-plane movements including twisting rotation”,
Smart Structures Systems, Vol. 20, No. 5, pp. 563-572, 2017.
10. Jong-Han Lee, Ilker Kalkan, Jong-Jae Lee, Jin-Hwan Cheung,
“Rollover instability of precast girders subjected to wind load”,
Magazine of Concrete Research, Vol. 69, No. 2, pp. 68-83, 2017.
2016
1. Sang-Hoon Oh and Hae-Yong Park,
“A study to enhance the deformation capacity of beam-to-column connections using high strength steel having high yield ratio”,
International Journal of Steel Structures, Vol. 16, No. 1, pp. 73-89, 2016.
2. Bub-Gyu Jeon, Nam-Sik Kim, and Sung-Il Kim,
“Estimation of the Vibration Serviceability Deflection Limit of a High-speed Railway Bridge
Considering the Bridge-Train Interaction and Travel Speed”,
KSCE Journal of Civil Engineering, Vol. 20, No. 2, pp 747-761, 2016.
3. Ehsan Salimi Firoozabad, Bub-Gyu Jeon, Hyoung-Suk Choi, Nam-Sik Kim,
“Failure Criterion for Steel Pipe Elbows Under Cyclic Loading”,
Engineering Failure Analysis, Vol. 66, pp. 515-525, 2016.
4. S. Kainuma, M. Yang, Young-Soo Jeong, S. Inokuchi, A. Kawabata, D. Uchida,
“Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decks”,
Journal of Constructional Steel Research, Vol. 119, pp. 113-122, 2016.
5. S. Kainuma, Young-Soo Jeong, M. Yang, S. Inokuchi,
“Welding residual stress in roots between deck plate and U-rib in orthotropic steel decks”,
Measurement, Vol. 92, pp. 475-482, 2016.
6. Sang-Hyo KIM, Jaegu Choi, JaeMin Lee, JunHwan Lee, Chi-Young Jung,
“Improved Load Carrying Behavior of Perfobond Rib-Installed Partially Expanded Micropiles”,
ASTM Geotechnical Testing Journal, Vol. 39, No. 4, pp. 633-647, 2016.
2015
1. Bub-Gyu Jeon, Sung-Jin Chang, Sung-Wan Kim, Nam-Sik Kim,
"Base Isolation Performance of A Cone-type Friction Pendulum Bearing System",
Structural Engineering and Mechanics, Submitted, Vol. 53, No. 2, pp. 227-248, 2015.
2. Ehsan Salimi Firoozabad, Bub-Gyu Jeon, Hyoung-Suk Choi, Nam-Sik Kim,
“Seismic fragility analysis of seismically isolated nuclear power plants piping system”,
Nuclear Engineering and Design, Vol. 284, pp. 264–279, 2015.
3. S. Kainuma, Jin-Hee. Ahn, Young-Soo Jeong, H. Sugiyama, M. Iwasaki,
“Evaluation of structural responses on artificial fatigue crack for bulb rib orthotropic deck”,
Advanced Structural Engineering, Vol.18, No.9, pp. 1355-1369, 2015.
4. S. Kainuma, Young-Soo, Jeong, Jin-Hee. Ahn,
“Stress distribution on the real corrosion surface of the orthotropic steel bridge deck”,
Steel and Composite Structures, Vol. 18, No. 6, pp. 1479-1492, 2015.
5. S. Kainuma, Young-Soo, Jeong, Jin-Hee. Ahn, T Yamagami, S. Tsukamoto,
“Behavior and stress of orthotropic deck with bulb rib by surface corrosion”,
Journal of Constructional Steel Research, Vol. 113, pp. 135-145, 2015.
6. S. Kainuma, Young-Soo. Jeong, J. Kobayashi,
“Influence of Size and Proximity of Paint Coating Defects on Corrosion Behavior of Carbon Steel Plates”,
Key Engineering Materials, Vol. 665, pp. 125-128, 2015.
7. Sang-Hyo Kim, Se-Jun Park, Won-Ho Heo, Chi-Young Jung,
“Shear resistance characteristic and ductility of Y-type perfobond rib shear connector”,
Steel and Composite Structures, Vol. 18, No. 2, pp. 497-517, 2015.
8. Jin-Hee Ahn, Jin-Hwan Cheung, Won-Hong Lee, Hong-Seob Oh, In-Tae Kim,
“Shear buckling experiments of web panel with pitting and through-thickness corrosion damage”,
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, Vol. 115, pp. 290-302, 2015.
2014
1. Dong-Uk Park and Nam-Sik Kim,
“Back analysis technique for tensile force on hanger cables of a suspension bridge”,
Journal of Vibration and Control, Vol. 20, No. 5, pp. 761-772, 2014.
2. S. Kainuma, Young-Soo, Jeong, Jin-Hee. Ahn, T. Imamura, T. Matsuda,
“Applicability and structural response for bearing system replacement in suspension bridge rehabilitation”,
Journal of Constructional Steel Research, Vol. 95, pp. 172-190, 2014.
3. S. Kainuma, Young-Soo. Jeong, Jin-Hee. Ahn,
“Investigation on the stress concentration effect at the corroded surface achieved by atmospheric exposure test",
Materials Science&Engineering A, Vol. 602, pp. 89-97, 2014.
4. Sang-Hyo Kim, Jin-Hee Ahn, Chi-Young Jung, Jae-Woon Jang, Young-Ho Park,
“Behaviour of Steel-box Semi-integral Abutement Bridge Considering Temperature-earth Pressure Change”,
International Journal of Steel Structures, Vol. 14, pp. 117-140, 2014.
5. Sang-Hyo Kim, Jaegu Choi, Se-jun Park, Jin-Hee Ahn, Chi-Young Jung,
“Behavior of composite girder with Y-type perfobond rib shear connectors”,
Journal of Constructional Steel Research, Vol. 103, pp. 275-289, 2014.
6. Sang-Hyo Kim, Won-Ho Heo, Kyung-Sik Woo, Chi-Young Jung, Se-Jun Park,
“End-bearing resistance of Y-type perfobond rib accroding to rib width-height ratio”,
Journal of Constructional Steel Research, Vol. 103, pp. 101-11, 2014.
2013
1. Sung-Wan Kim and Nam-Sik Kim,
“Dynamic characteristics of suspension bridge hanger cables using digital image processing”,
NDT & E International, Vol. 59, pp. 25 – 33, 2013.
2. Sung-Wan Kim, Sung-Soo Lee, Nam-Sik Kim, and Dae-Joong Kim,
“Numerical model validation for a prestressed concrete girder bridge by using image signals”,
KSCE Journal of Civil Engineering, Vol. 17, No. 3, pp. 509-517, 2013.
3. Sung-Wan Kim, Bub-Gyu Jeon, Nam-Sik Kim, and Jong-Chil Park,
“Vision-based monitoring system for evaluating cable tensile forces on a cable-stayed bridge”,
Structural Health Monitoring, Vol. 12, No. 5-6, pp. 440-456, 2013.
4. J.H. Ahn, S. Kainuma, I.T. Kim, Y.S. Jeong,
“Assessment of Shear Behaviors of A Web Panel with Free Lower Boundary”,
Advanced Materials Research, Vol. 684, pp. 120-124, 2013.
5. Y.S. Jeong, S. Kainuma and J.H. Ahn,
“Structural response of orthotropic bridge deck depending on the corroded deck surface”,
Construction and Building Materials, Vol. 43, pp. 87-97, 2013.
6. In-Tae Kim and Young-Soo Jeong,
“Fatigue Strength Improvement of Welded Joints by Blast Cleaning for Subsequent Painting”,
International journal of steel structures, Vol. 13, No. 1, pp. 11-20, 2013.
7. Sang-Hyo Kim, Kyu-Tae Choi, Se-Jun Park, Seung-Min Park, Chi-Young Jung,
“Experimental shear resistance evaluation of Y-type perfobond rib shear connector”,
Journal of Constructional Steel Research, Vol. 82, No. 1, pp. 1-18, 2013.
8. Sang-Hyo Kim, Jung-Yeun Joung, Kyu-Tae Choi, Chi-Young Jung,
“Experimental load-carrying capacity evaluation of thermal prestressed H beam with steel brackets”,
Journal of Constructional Steel Research, Vol. 88, pp. 309-320, 2013.
9. K.S. Lee, S.H. Lee, S.W. Shin
“Shear Behavior of Reinforced Concrete Beams Strengthened by Epoxy Mortar Panel with Steel Fibers”,
Advances in Structural Engineering, Vol. 16, No. 6, pp. 987-1000, 2013. 6.
10. Sang-Hoon Oh, Sung-Hoon Song, Sang-Ho Lee, Hyung-Joon Kim,
“Experimental study of seismic performance of base-isolated frames with U-shaped hysteretic energy-dissipating divices”,
Engineering Structures, Vol. 56, pp. 2014-2027, 2013. 11.
2012
1. Sung-Jin Chang and Nam-Sik Kim,
“Estimation of Displacement Response from FBG Strain Sensors Using Empirical Mode Decomposition Technique”,
Experimental Mechanics, Vol. 52, No. 6, pp. 579-589, 2012.
2. Y. S. Jeong, S. Kainuma,
“Spatial Statistical Analyses for Time-dependent Corroded Surfaces of Uncoated Weathering Steel Plates
in Various Corrosive Environments”,
Key Engineering Materials, Vol. 488-489, pp. 57-60, 2012.
3. S. Kainuma, Y.S. Jeong, K. Utsunomiya and J.H. Ahn,
“Numerical Simulations for Time-dependent Corrosion Surfaces of Unpainted Carbon Steel Plates
in Atmospheric Corrosive Environments Using Spatial Statistical Techniques”,
Corrosion Engineering, Vol. 61, No. 7, pp. 283-290, 2012.
4. S. Kainuma, J.H. Ahn, Y.S. Jeong and H. Takahashi,
“Evaluation on Estimation in Characteristics of Fatigue Crack Using Micro-Encapsulated Dye Mixing Paint”,
Engineering Failure Analysis, Vol. 25, pp. 1-12, 2012.
5. Young-Bong Kwon, Jin-Hwan Cheung, Byung-Seung Kong, Hwan-Woo Lee, Kwang-Kyu Choi,
“Flexural Tests on the H-Section Simple Beams with Local Buckling”,
Applied Mechanics and Materials Vols. 105-107, pp. 1677-1680, 2012.
6. Sang-Hoon Oh, Sung-Hoon Song, Sang-Ho Lee, Hyung-Joon Kim,
“Seismic Response of Base Isolating Systems with U-shaped Hysteretic Dampers”,
International Journal of Steel Structures, Vol. 12, No. 2, pp. 285-298, 2012. 6.
2011
1. Sang-Hyo Kim, Jin-Hee Ahn, Kyu-Tae Choi, Chi-Young Jung,
“Experimental Evaluation of the Shear Resistance of Corrugated Perfobond Rib Shear Connections”,
Advances in Structural Engineering, Vol. 14, No. 3, pp. 431-444, 2011.
2. Sang-Hyo Kim, Chi-Young Jung, Jin-Hee Ahn,
“Ultimate strength of composite structure with different degrees of shear connection”,
Steel and Composite Structures, Vol. 11, No. 5, pp. 375-390, 2011.
3. Sang-Hyo Kim, Jun-Hwan Kim, Chi-Young Jung, Jin-Hee Ahn,
“A Verification of Simplified Analysis Method for Thermal Prestressing in Continuous Composite Bridge”,
International Journal of Steel Structures, Vol. 11, No. 4, pp. 427-443, 2011.
4. Hyoung-Suk Choi, Jin-Hwan Cheung, Sang-Hyo Kim, Jin-Hee Ahn,
“Structural dynamic displacement vision system using digital image processing”,
NDT&E International 44, pp. 597–608, 2011.
2010
1. Jin-Hee Ann, Chi-Young Jung, Sang-Hyo Kim,
“Evaluation on structural behaviors of prestressed composite beams using external prestressing member”,
Structural Engineering and Mechanics, Vol. 34, No. 2, pp. 247-275, 2010.
2. Sang-hyo Kim, Jun-Hwan Kim, Chi-young Jung, Jin-Hee Ahn,
“Life-cycle Cost Analysis of a TPSM Applied Continuous Composite Girder Bridge”,
International Journal Of Steel Structures, Vol 10, No. 2, pp. 115-129, 2010.
3. Han-Seon Lee, Chang-Seok Cho, Sang-Ho, Lee, Sang-Hoon Oh, Hong-Gun Park,
“Experimental Study on the Similitude of Small-Scale Models in Cyclic Lateral Behaviors of RC Shear Wall Subassemblages”,
Journal of Korea Concrete Institute, Vol. 22, No. 6, pp. 805-816, 2010.
2009
1. Sang-Hyo Kim, Jin-Hee Ahn, Chi-Young Jung, Jun-Hwan Kim,
“Multi-stepwise thermal prestressing using a cover-plate in steel structures”,
Journal of Constructional Steel Research, Vol. 65, No. 7, pp. 1464-1479, 2009.
KCI list
2020
1. Sang-hoon Oh, Youn-hyeok Kim, Young-ju Kim, Hong-sik Ryu, Hae-young Park,
“An Analytical Study on the Deep H-Shaped Beam-to-Column Connections
with Double Slit Damper Type Energy Absorption System”,
Journal of Korean Society of Steel Construction , Vol. 32, No. 1, pp. 11-22, 2020.
2. Bub-gyu Jeon, Sung-Jin Chang, Jae-bong Kim, Bu-seog Ju,
“Experimental Study for Earthquake and Subsidence-resistant Performance Evaluation of iPVC Buried Water Pipe”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.), Vol. 24, No. 1, pp. 16-23, 2020.
2019
1. Sung-wan Kim, Bub-gyu Jeon, Seong-woo Ahn, Seong-woo Wi,
“A study for seismic behavior of a riser pipe with flexible groove joints using cyclic loading test”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 29, No. 1, pp. 67-74, 2019.
2. Sung-wan Kim, Bub-gyu Jeon, Jin-hwan Cheung, Seong-do Kim,
“Low-cycle Fatigue Behaviors of the Steel Pipe Tee of a Nuclear Power Plant Using Image Signals”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.), Vol. 23, No. 6, pp. 77-83, 2019.
3. Hae-young Park, Bub-gyu Jeon, Jae-bong Kim, Min-uk Gim,
“Triaxial Shake Table Test about Seismic Performance of Ceiling System with Gypsum Panels”,
Journal of the Architectural Institute of Korea Structure & Construction (JAIK) , Vol. 35, No. 10, pp. 143–153, Oct. 2019.
4. Sung-jin Chang, Dong-uk Park, Jae-bong Kim,
“A method for generating floor response spectra for seismic design for non-structural components”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 23, No. 1, pp. 154–162, Jan. 2019.
5. Young-soo Jeong, Seung-hyun Eem, Bub-gyu Jeon, Dong-uk Park,
“Comparison of response of battery charger in nuclear power plant depending on frequency characteristics in seismic motions”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 29, No. 1, pp. 120-130, February. 2019.
6. Eun-rim Baek, Ji-hyeon Oh, Hyoung-suk Choi, Sang-ho Lee,
"Evaluation of seismic design force by earthquake response analysis of water tanks installed in RC buildings",
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 23, No. 4, pp. 221-229, 2019.
7. Young-soo Jeong, Eun-rim Baek, Bub-gyu Jeon, Sung-jin Chang, Dong-uk Park,
"Seismic performance of emergency diesel generator for high frequency motions",
Nuclear Engineering and Technology, Vol. 51, No. 5, pp. 1470-1476, 2019.
8. In-hyuk Choi, Eun-rim Baek, Sang-ho Lee,
"Study on the Seismic Performance for Low-rised RC Building with Vertical and Torsional Irregularities",
Journal of the Architectural Institute of Korea Structure & Construction (JAIK) , Vol. 35, No. 12, pp. 137-148, 2019.
9. Hyuck-jin Kim, Eun-rim Baek, You-sok Kim, Sang-ho Lee,
"An analysis study on the school buildings damaged by the Pohang earthquake",
journal of the regional association of architectural institute of korea, Vol. 21, No. 1, pp. 15-23, 2019.
10. Da-woon Yun, Bub-gyu Jeon, Woo-young Jung, Sung-jin Chang, Yong-jae Shin,
“Analysis of anchorage behavior characteristics of the electrical cabinet using shaking table tests”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 29, No.1, pp. 43-50, 2019.
11. Bub-gyu Jeon, Da-woon Yun, Yong-jae Shin, Woo-young Jung,
“Seismic Performance Evaluation for Hydroelectric Power Plants RTU Panel by Shaking Table Tests”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 29, No. 6, pp. 770-779, 2019.
12. Sung-jin Chang, Bub-gyu Jeon, Sung-wan Kim, Dae-gi Hahm,
“Study on cyclic loading conditions for seismic performance evaluation of domestic riser pipe”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 29, No. 2, pp. 191-198, 2019.
13. Yun-chan Jang, Ik-joong Kim, Cheol-man Kim, Bub-gyu Jeon, Sung-jin Chang, Young-Pyo Kim,
“A Study on the Deformation Characteristics of Gas Pipeline under Internal Pressure and In-Plane Bending Load”,
Transactions of the Korean Society of Pressure Vessels and Piping, Vol. 15, No. 2, pp. 50-57, 2019.
14. Seung-hyun Eem, Bub-gyu Jeon, Sung-jin Chang, In-kil Choi,
“Evaluate the Characteristics of Vibration Caused by Rocking Modes of Electric Cabinet under Seismic Loading”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 29, No. 6, pp. 735-744, 2019.
15. Ho-Young Son, Woo-young Jung, Bub-gyu Jeon, Bu-Seog Ju,
“Seismic Fragility Analysis of Electrical Cabinet at Anchor System”,
Journal of the Korean Society for Advanced Composite Structures (J. Korean Soc. Adv. Comp. Struc.), Vol. 10, No. 6, pp. 84-90, 2019.
16. Young-soo Jeong, Min-jeong Kim, Seok-hyeon Jeon, Jin-hee Ahn, In-tae Kim,
“Suggestion of deterioration curve for new-type coating on atmospheric environment by acceleration corrosion test”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.), Vol. 23, No. 2, pp. 75-83, 2019.
17. Seok-hyeon Jeon, Min-Gyun Ha, Young-soo Jeong, Jin-hee Ahn,
“Evaluation of corrosion damage of structural steel depending on atmospheric exposure test”,
Journal of Korean Society of Steel Construction , Vol. 31, No. 4, pp. 245-252, 2019.
18. Jin-hee Ahn, Seok-hyeon Jeon, Taek-ryong Seong, Young-soo Jeong,
“Estimation of corrosion damage rate using corrosion current depending on atmospheric corrosion environment”,
Journal of Korean Society of Steel Construction , Vol. 31, No. 4, pp. 253-260, 2019.
19. Min-Gyun Ha, Young-soo Jeong, Seung-hun Park, Jin-hee Ahn,
“Evaluation of Relative Corrosion Rate depending on Local Location and Installation of Structural Member in Steel Water Gate”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 23, No. 7, pp. 16-24, 2019.
20. Chi-young Jung, Tae-ryeon Woo, Jong-han Lee, Jin-hwan Cheung,
“Evaluation of the pull-out resistance of the SMA wire connector”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 23, No. 1, pp. 130-137, January. 2019.
21. Seong-haeng Lee, Kyoung-nam Kim, Hyoung-suk Choi,
“Estimation of minimum design effective temperature for steel box girder bridges considering asphalt thickness of concrete deck”,
Journal of Korean Society of Steel Construction , Vol. 31, No. 1, pp. 23-30, 2019.
22. Jin-hee Ahn, Jin-woo Jeong, Yu-chan Hong, Jae-bong Park, Hyoung-suk Choi,
“Proposal and evaluation of ground response spectrum estimation algorithm based on seismic observation data”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.), Vol. 23, No. 5, pp. 13-22, 2019.
2018
1. Sung-wan Kim, Jin-hwan Cheung, Seong-do Kim,
“Cable Tension Measurement of Long-span Bridges Using Vision-based System”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 22, No. 2, pp. 115-123, 2018.
2. Sung-jin Chang, Bub-gyu Jeon, Dong-uk Park, Eun-rim Baek,
“Seismic performance evaluation of isolated common bed system for diesel engine generator”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 28, No. 6, pp. 759-765, December. 2018.
3. Young-soo Jeong, Eun-rim Baek, Bub-gyu Jeon, Min-uk Gim, Dong-uk Park,
“Evaluation of Limit State Seismic Performance of Emergency Diesel Generator”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 28, No. 2, pp. 188-196, April. 2018.
4. Sang-hoon Oh, Jong-won Park, Hae-young Park,
“Shake Table Test on Seismic Performance Evaluation of the Bolted Connection Type Paneling System with Exterior Finish Material”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 22, No. 1, pp. 23-32, 2018.
5. Eun-cheol Moon, Eun-rim Baek, Sang-ho Lee,
"Influence of inter-story strength and stiffness ratios on the seismic performance of RC pilotis type building",
Journal of the Korea Concrete Institute, Vol. 30, No. 6 pp. 633-640, 2018.
6. Young-soo Jeong, Kainuma Shigenobu, Jin-hee Ahn, Won-hong Lee,
“Assessment of Fatigue Life of Out-Of-Plane Gusset Welded Joints using 3D Crack Propagation Analysis”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.), Vol. 22, No. 1, pp. 129-136, 2018.
7. Hyoung-seok Kim, Chang-hee Shin, Duy Kien Dao, Young-soo Jeong, In-tae Kim,
“Evaluation on residual compressive strength of welded circular tubular members with locally corroded ends”,
Journal of Korean Society of Steel Construction , Vol. 30, No. 3, pp. 145-152, 2018.
8. Young-bin Lee, Young-soo Jeong, Taek-ryong Seong, Jin-hee Ahn,
“Estimation of Mean Corrosion Depth of Structural Steel Using Thickness of Corrosion Products”,
Journal of Korean Society of Steel Construction , Vol. 30, No. 3, pp. 153-161, 2018.
9. Tae-ryeon Woo, Jong-han Lee, Jin-hwan Cheung, Chi-young Jung,
“Evaluation of the Effect of Coupler on the Ductility of Rebar by Uniaxial Tensile Test”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 22, No. 1, pp. 90-98, January. 2018.
10. Jong-su Jeon, Hyoung-suk Choi, Young-deuk Seo, Chung-gil Kim, Gwang-hee Heo,
“Seismic Performance of Steel Industrial Storage Racks Subjected to Korea Earthquakes”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 22, No. 3, pp. 149-160, 2018.
11. Jae-bong Park, Jin-hee Ahn, Hyoung-suk Choi, Gyu-seon Kim, Gi-Chun Kang,
“Application of Existing Distance Attenuation Relationships Using PGAs Recorded during Earthquakes”,
Journal of The Korean Society of Hazard Mitigation, Vol. 18, No. 6, pp. 149-159, 2018.
2017
1. Sung-wan Kim, Jin-hwan Cheung, Seong-do Kim, Jae-bong Park, Myoung-jin Lee,
“Lateral Load Distribution Estimation of a PSC Girder Bridge from Dynamic Loading Test”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 21, No. 3, pp. 60-68, 2017.
2. Sung-wan Kim, Min-uk Gim, Bub-gyu Jeon, Suck-ho Lee, Byung-kyu Bae,
“Seismic Performance Evaluation of Outdoor Sealing End for 230kV XLPE Power Cable”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 27, No. 6, pp. 767-775, 2017.
3. Dong-uk Park, Bub-gyu Jeon, Nam-sik Kim, Ja-min Park, Jae-yeol Cho,
“Fragility Analysis of A Scaled Model of Reinforced Concrete Column in Accordance with Similitude Law”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 21, No. 2, pp. 87-93, March. 2017.
4. Eun-rim Baek, Hyoung-suk Choi, Dong-uk Park, Nam-sik Kim, Jae-min Kim,
“Shake Table Test DB of the Liquid Storage Tank for Fluid Sloshing Analysis”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 27, No. 5, pp. 545-554, October. 2017.
5. Hyoung-suk Choi, Dong-uk Park, Sung-wan Kim, Jae-min Kim, Eun-rim Baek,
“Estimation of Dynamic Properties of Steel Liquid Storage Tank by Shaking Table Test”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 21, No. 4, pp. 153-161, July. 2017.
6. Sang-hoon Oh, Hae-young Park,
“Evaluation of Strength and Stiffness of the Damper Installed at Beam End for Damage-Controlled Structures ”,
Journal of the Architectural Institute of Korea Structure & Construction (JAIK) , Vol. 33, No. 2, pp. 27-36, 2017.
7. Il-Min Son, Jae-min Kim, Hyoung-suk Choi, Eun-rim Baek,
"Post-Correlation Analysis for Shake Table Test of Square Liquid Storage Tank",
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 21, No. 1, pp. 23-29, 2017.
8. Kyung-min Kim, Ju-hyun Cheon, Eun-rim Baek, Sang-hoon Oh, Chul-sung Hwang,
"An Experimental Study on the Influence of Masonry InFilled Walls on the Seismic Performance of
Reinforced Concrete Frames with Non-seismic Details",
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 21, No. 3, pp. 114-120, 2017.
9. U-jin Kwon, Eun-rim Baek, Sang-ho Lee,
"Structural Behaviour Characteristics of Low-rised Piloti Type Reinforced Concrete Building
According to Stiffness and Strength Ratios of Inter-story",
Journal of the regional association of architectural institute of korea, Vol. 19, No. 1, pp. 201-209, 2017.
10. Eun-rim Baek, Kyung-min Kim, Ju-hyun Cheon, Sang-hoon Oh, Sang-ho Lee,
"Dynamic Behaviour of Masonry inFilled Reinforced Concrete Frames with Non-Seismic Details",
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 21, No. 3, pp. 121-129, 2017.
11. Young-soo Jeong, Moo-su Park, Hyoung-suk Choi, Jin-hee Ahn, Won-hong Lee,
“Evaluation on Lateral Structural Resistant Capacity of Curved Concrete Filled Circular Steel Column”,
Journal of The Korean Society of Hazard Mitigation, Vol. 17, No. 2, pp. 155-161, 2017.
12. Young-soo Jeong, Young-bin Lee, Ki-Heung Kim, Ki-tae Park, Jin-hee Ahn,
“Evaluation of Coating Life for Effective Maintenance on Drainage Gate”,
Journal of The Korean Society of Hazard Mitigation, Vol. 17, No. 3, pp. 217-223, 2017.
13. Jae-min Mun, Young-soo Jeong, Je-hyong Jun, Jin-hee Ahn, In-tae Kim,
“Experimentally Evaluating Fatigue Behavior of Corroded Steels Exposed in Atmospheric Environments”,
Journal of Korean Society of Steel Construction , Vol. 29, No. 3, pp. 193-204, 2017.
14. Jin-hee Ahn, Won-hong Lee, In-tae Kim, Young-soo Jeong,
“Evaluation on Bearing Capacity of End Girder Member with Local Corrosion”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 21, No. 5, pp. 74-82, 2017.
15. Jin-hwan Cheung, Jong-han Lee, Tae-ryeon Woo, Chi-young Jung,
“Evaluation on Strain and Necking Region of the Rebar by Using Image Processing Method”,
Journal of the Korea Concrete Institute, Vol. 29, No. 1, pp. 33-42, Febuary. 2017.
16. Bub-gyu Jeon, Sung-wan Kim, Hyoung-suk Choi, Dong-uk Park, Nam-sik Kim,
“A Failure Estimation Method of Steel Pipe Elbows under In-Plane Cyclic Loading”,
Nuclear engineering and technology, Vol. 49, No. 1, pp. 245-253, 2017.
2016
1. Yong-myung Park, Sung-hoon Jo, Tae-hyung Kim, Choong-hyun Kang, Jae-bong Kim,
“Static Shear Strength of Cast-in Anchors with Stirrup Reinforcement”,
Journal of Korean Society of Steel Construction , Vol. 28, No. 1, pp. 1-12, Feb. 2016.
2. Eun-rim Baek, Jung-hyun Kim, Sang-ho Lee,
"Evaluation of the Seismic Performance for Domestic URM Buildings Using Nonlinear Dynamic Analysis",
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 20, No. 3, pp. 83-92, 2016.
3. Jung-han Park, Eun-rim Baek, Sang-ho Lee,
"Analytical Study on the Seismic Performance of the Ceiling Frame under Horizontal Earthquake Loading",
Journal of the regional association of architectural institute of korea, Vol. 18, No. 3, pp. 155-163, 2016.
4. In-tae Kim, Je-hyong Jun, Ki-hyuk Cha, Young-soo Jeong, Jin-hee Ahn,
“Experimental Evaluation of Weathering Performance for Duplex Coating Systems
Combining Thermal Spraying Metals and Painting”,
Journal of Korean Society of Steel Construction , Vol. 28, No. 5, pp. 373-382, 2016.
5. Seong-do Kim, Chi-young Jung, Tae-ryeon Woo, Jin-hwan Cheung,
“Application of Image Processing Method to Evaluate Ultimate Strain of Rebar”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 20, No. 3, pp. 111-121, May. 2016.
2015
1. Bub-gyu Jeon, Hyoung-suk Choi, Dae-gi Hahm, Nam-sik Kim,
“Seismic fragility analysis of base isolated NPP piping systems”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 19, No. 1, pp. 29-36, 2015.
2. Bub-gyu Jeon, Chi-young Jung, Jung-woon Jin, Han-hwa Kim, Jin-hwan Cheung,
“Seismic Performance Evaluation of 500kV EBA”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 25, No. 7, pp. 496-502, 2015.
3. Jin-Hwan Cheung, In-Tae Kim, Tae-Jin Kim, Myoung-Jin Lee, Jin-Hee Ahn,
“Mechanical Performance Evaluation of Rolling Thread Steel Rebar Connection with Taper type Coupler”,
Journal of Korea institute for Structural Maintenance and Inspection, Vol. 19, No. 2, pp. 40-51, 2015.
4. Seong-Do Kim, Jin-Hee Ahn, Young-Ee Kong, Hyoung-Suk Choi, Jin-Hwan Cheung,
“Multi-support excitation shaking table test of a base-isolated steel cable-stayed bridge”,
Journal of Earthquake Engineering Society of Korea, Vol. 19, No. 4, pp. 161-171, 2015.
2014
1. Dong-uk Park, Nam-sik Kim, Sung-il Kim,
“Numerical Model Updating Based on Univariate Search Method for High Speed Railway Bridges”,
Journal of the Korean Society of Civil Engineers, Vol. 34, No. 1, pp. 17-27, February. 2014.
2. Sang-hoon Oh, Hae-young Park,
“A Study on Deformation Capacity of High Strength Steel Beam-to-Column Connections
According to Welding Detail at Beam End”,
Journal of Korean Society of Steel Construction , Vol. 26, No. 4, pp. 335-348, 2014.
3. Sang-hoon Oh, Hae-young Park,
“Seismic Performance of High Strength Steel(HSA800) Beam-to-Column Connections with Improved Horizontal Stiffener”,
Journal of Korean Society of Steel Construction , Vol. 26, No. 4, pp. 361-374, 2014.
4. Kyung-min Kim, Jung-han Lee, Sang-hoon Oh, Eun-rim Baek,
"Crack Width Properties on RC Members with Non-seismic Details",
Journal of The Korean Society of Hazard Mitigation, Vol. 14, No. 3, pp. 27-33, 2014.
5. Eun-rim Baek, Jung-hyun Kim, Sang-ho Lee, Sang-hoon Oh,
"Nonlinear Analysis Model Considering Failure Mode of Unreinforced Masonry Wall",
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 18, No. 4, pp. 33-40, 2014.
6. Eun-rim Baek, Sang-hoon Oh, Sang-ho Lee,
"Seismic Performance of an Existing Low-Rise Reinforced Concrete Piloti Building Retrofitted by Steel Rod Damper",
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 18, No. 5, pp. 241-251, 2014.
7. Jung-Han Lee, Kyung-Min Kim, Hye-Won Kim, Jin-Sun Kim, Sang-Hoon Oh, Sang-Ho Lee,
"Seismic Retrofitting Effects of Retrofitted Unreinforced Masonry Walls Using Metal Laths and Steel Plates",
Jorunal of Korean Society of Hazard Mitigation, Vol. 14, No. 3, pp. 63-70, 2014. 6.
8. Eun-Rim Baek, Jung-Hyun Kim, Xiuming Cui, Sang-Hoon Oh, Sang-Ho Lee,
"Damage Estimation of Masonry Building by Volcanic Earthquake of Mt. Baekdu: From Nearby Area of Mt. Baekdu to Seoul in Korea",
Center for International Area Studies, Vol. 18, No. 3, pp. 303-328, 2014. 9.
2013
1. Sung-il Kim, Hyun-min Kim, Dong-uk Park,
“Field Tests and Resonance Behavior Corresponding to the Damping Ratio of a High Speed Railroad Bridge”,
JOURNAL OF THE KOREAN SOCIETY FOR RAILWAY (JKSR), Vol. 16, No. 4, pp. 305-310, August. 2013.
2. Sang-hoon Oh, Hae-young Park,
“A Study on Beam-to-Column Connections with Plate Type Energy Absorption System”,
Journal of Korean Society of Steel Construction , Vol. 25, No. 1, pp. 103-114, 2013.
3. Eun-rim Baek, Sang-hoon Oh, Sang-ho Lee,
"Performance of Seismic Retrofit According to the Stiffness and Strength Ratios of Steel Damper to Reinforced Concrete Frame",
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 17, No. 4, pp. 171-180, 2013.
4. Sang-hyo Kim, Jung-yeun Joung, Won-ho Heo, Chi-young Jung,
“Performance Evaluation of Rahman-type Movable Joint System for Temporary Bridge”,
Journal of Korean Society of Steel Construction , Vol. 25, No. 1, pp. 33-45, February. 2013.
5. Jin-hwan Cheung, Man-soo Gae, Young-deuk Seo, Hyoung-suk Choi, Min-kyu Kim,
“Seismic Capacity Test of Nuclear Piping System using Multi-platform Shake Table”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 17, No. 1, pp. 21-31, 2013.
6. In-Tae Kim, Min-Ho Park, Jin-Hwan Cheung,
“Applicability of Hammer-Peening Treatment for Fatigue Life Improvement of Fatigue Damaged Weld Joints”,
Jorunal of Korea institute for Structural Maintenance and Inspection, Vol. 17, No. 3, pp. 48-55, 2013.
7. Se-Jun Park, Seong-Hwan Won, Moon-Seock Choi, Sang-Hyo Kim, Jin-Hwan Cheung,
“Seismic Performance Evaluation of Externally Reinforced Panel Water Tank Using Shaking Table Tests”,
Jorunal of Earthquake Engineering Society of Korea, Vol. 17, No. 4, pp. 151-157, 2013.
8. Kyung-Min Kim, Sang-Ho Lee, Sang-Hoon Oh,
“Seismic Performance Evaluation of Existing Low-rise RC Frame with Non-seismic Detail”,
Jorunal of Earthquake Engineering Society of Korea, Vol. 17, No. 3, pp. 97-105, 2013. 5.
2012
1. Sung-wan Kim, Nam-sik Kim,
“Application of vision-based measurement system for estimation of dynamic characteristics on hanger cables”,
Journal of the Korean Society of Civil Engineers A , Vol. 32, No. 1, pp. 1-10, 2012.
2. Sung-jin Chang, Nam-sik Kim, Joon-ho Baek,
“Development of smart seismic device using FBG sensor for measuring vertical load”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 11, pp. 1089-1098, 2012.
3. Sung-Jin Chang, Nam-Sik Kim,
"Numerical Verification of B-WIM System Using Reaction Force Signals",
Journal of the Korean Society for Nondestructive Testing, Vol. 32, No. 6, pp. 637-647, 2012.
4. Jin-hwan Cheung, In-tae Kim, Seock-jin Choi, Hyoung-suk Choi, Hee-sung Kim,
“An Experimental Study on Failure Behavior of TP316 Stainless Steel Pipe with Local Wall Thinning and racking”,
Journal of Korean Society of Steel Construction , Vol. 24, No. 6, pp. 647-657, 2012.
5. Kyung-Min Kim, Sang-Hoon Oh, Sang-Ho Lee, Han-Seon Lee,
“Nonlinear Static Analysis of Shear Wall Sub-assemlages Based on the Uniaxial Spring Model”,
Journal of Earthquake Engineering Society of Korea, Vol. 16, No. 2, pp. 15-24, 2012. 4.
6. Yu-Jin Lee, Sang-Hoon Oh, Sang-Ho Lee,
“Analytical study on the non-linear seismic response characteristics of the base-fixed/isolated structures”,
Journal of the regional association of Architectural Institute of Korea, Vol. 14, No. 4, pp. 205-212, 2012. 12.
2011
1. Dong-uk Park, Nam-sik Kim,
“Evaluation of damping properties on suspension bridge using extended kalman filter”,
Journal of the Korean Society of Civil Engineers A , Vol 31, No. 2, pp. 89-96, March. 2011.
2. Sang-hoon Oh, Young-suk Oh, Soon-jo Hong, Hae-young Park,
“A Study about Behavior of Steel Column Members under Varying Axial Force”,
Journal of Korean Society of Steel Construction , Vol. 23, No. 2, pp. 179-188, 2011.
3. Sang-ho Lee, Sang-hoon Oh, Eun-rim Baek,
"Proposal of Steel Damper System to Improve the Seismic Performance of Reinforced Concrete Frame",
Journal of the Architectural Institute of Korea Structure & Construction (JAIK) , Vol. 27, No. 9, pp. 21-28, 2011.
4. Bub-gyu Jeon, Sung-jin Chang, Kyung-rock Park, Nam-sik Kim, Duk-young Jung,
“Seismic Performance Evaluation of a Cone-type Friction Pendulum Bearing System”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 15, No. 2, pp. 23-33, 2011.
5. Bub-gyu Jeon, Sung-jin Chang, Nam-sik Kim,
“Seismic performance evaluation of cone-type friction pendulum bearing system using shaking table test”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 21, No. 7, pp. 599-608, 2011.
6. Bub-gyu Jeon, Nam-sik Kim, Sung-il Kim,
“Deflection limit based on vibration serviceability of railway bridges considering the correlation between train
speed and vertical acceleration on coach”,
JOURNAL OF THE KOREAN SOCIETY FOR RAILWAY (JKSR), Vol. 14, No. 6, pp. 545-554, 2011.
7. Kyung-rock Park, Bub-gyu Jeon, Nam-sik Kim, Ju-won Seo,
“Analysis of the Spectrum Intensity Scale for Inelastic Seismic Response Evaluation”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 15, No. 5, pp. 35-44, 2011.
8. In-tae Kim, Young-soo Jeong, Dong-uk Lee,
“Improving Fatigue Strength of Weld Joints by Blast Cleaning used in Painting Steel Bridge”,
Journal of Korean Society of Steel Construction , Vol. 23, No. 2, pp. 137-146, 2011.
9. Hyoung-suk Choi, Da-jung Jung, Seong-do Kim, Jin-hwan Cheung,
“The Vibration Comfort Evaluation of the Shaking Table Mass Foundation”,
Jorunal of the Earthquake ngineering Society of Korea (EESK), Vol. 15, No. 2, pp. 53-60, 2011.
10. Hyoung-suk Choi, Jung-woo Kim, Yeong-I Gong, Jin-hwan Cheung, In-tae Kim,
“Pounding Characteristics of a Bridge Superstructure on Rubber Bearings”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 15, No. 4, pp. 13-21, 2011.
11. Seong-Haeng Lee, Jin-Hwan Cheung, Kyoung-Nam Kim, Hyung-Gil Hahm, Kyoung-Sup Jung,
“Characteristics on the Temperature Distribution in Steel Girder Bridge by using Gauge Measurement”,
Jorunal of Korean Society of Steel Construction, Vol. 23, No. 3, pp. 283-294, 2011.
12. Sang-Ho Lee, Myung-Kun Cha, Hong-Sik Ryu, Sang-Hoon Oh,
“Shaking Table Test for the Evaluation of Response Characteristics of Flat Plate Structure Using Base Isolation System”,
Jorunal of Architectural Institute of Korea, Vol. 27, No. 2, pp. 29-38, 2011. 2.
13. Seong-Jun Hwang, Kyung-Bo Lee, Chang-Bum Kang, Han-Seon Lee, Sang-Ho Lee, Sang-Hoon Oh,
“Design and Construction of a 1:5 Scale 10-Story R.C. Apartment Building Model for Earthquake Simulation Tests”,
Jorunal of the Earthquake Engineering Society of Korea, Vol. 15, No. 6, pp. 55-66, 2011. 12.
14. Han-Seon Lee, Seong-Jun Hwang, Kyung-Bo Lee, Chang-Bum Kang, Sang-Ho Lee, Sang-Hoon Oh,
“Earthquake Simulation Tests on a 1:5 Scale 10-story R.C. Residential Building Model”,
Jorunal of the Earthquake Engineering Society of Korea, Vol. 15, No. 6, pp. 67-80, 2011. 12.
2010
1. Sung-wan Kim, Nam-sik Kim,
“Verification of Multi-point Displacement Response Measurement Algorithm Using Image Processing Technique”,
Journal of the Korean Society of Civil Engineers A , Vol. 30, No. 3, pp. 297-307, 2010.
2. Sung-jin Chang, Nam-sik Kim,
“Applications of Displacement Response Estimation Algorithm Using Mode Decomposition Technique to Existing Bridges ”,
Journal of the Korean Society of Civil Engineers A , Vol. 30, No. 3, pp. 257-264, 2010.
3. Sang-hyo Kim , Chi-young Jung, Ha-min Chung, Jin-hee Ahn,
“Analysis of Electric Power Effect of Piezoelectric Element on Steel-concrete Composite Bridge”,
Journal of Korean Society of Steel Construction , Vol. 22, No. 5, pp. 411-420, October. 2010.
4. Sang-hyo Kim , Chi-young Jung, Kyu-tae Choi, Jin-hee Ahn,
“Load-carrying Capacity of Thermal Prestressed Steel Beam with Eccentric Bracket”,
Journal of Korean Society of Steel Construction , Vol. 22, No. 6, pp. 563-572, December. 2010.
2009
1. Sung-wan Kim, Nam-sik Kim,
“Multi-point Dynamic Displacement Measurements of Structures Using Digital Image Correlation Technique”,
Jorunal of the Earthquake Engineering Society of Korea (EESK), Vol. 13, No. 3, pp. 11-19, 2009.
2. Sung-kee Yoon, Jae-bong Kim,
“Developement of Shear Reinforcement for Column-Flat Plate Connection with Mortar Filled Steel Tube”,
Journal of the Architectural Institute of Korea Structure & Construction (JAIK) , Vol. 25, No. 4, pp. 19-26, 2009.
3. Sung-kee Yoon, Jae-bong Kim,
“Anchorage Capacity of Shear Reinforcement for Flat Plate by Concrete Breakout Failure”,
Journal of the Architectural Institute of Korea Structure & Construction (JAIK) , Vol.25, No. 9, pp. 31-38, 2009.
4. Dong-uk Park, Nam-sik Kim, Sung-il Kim,
“Damping Estimation of Railway Bridges Using Extended Kalman Filter”,
Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 3, pp. 294-300, June. 2009.
5. In-tae Kim, Young-soo Jeong, Kwang-jin Kim, Dong-uk Lee,
“Effect of blast cleaning on fatigue behavior of non-load-carrying fillet welded cruciform Joints”,
Journal of Korean Society of Steel Construction , Vol. 21, No.1, pp. 55-62, 2009.
6. Jin-hee Ahn, Chi-young Jung, Kyu-tae Choi, Sang-hyo Kim ,
“Load-Carrying Capacity Evaluation of the Composite Beam Strengthened
by Multi-Stepwise Thermal Prestressing Method Using Cover-Plate”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 13, No, 4, pp. 159-169, July. 2009.
7. In-tae Kim, Dong-woo Kim, Hyoung-suk Choi, Jin-hwan Cheung,
“A Preliminary Study on the Reused Channel-Type Lining Board with Corrosion-Damage”,
Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Maint. Insp.),
Vol. 13, No. 4, pp. 170-179, 2009.
Patent list
2019
1. Sung-wan Kim, Ki-Young Seo, Hyun-Jae Park, Bub-gyu Jeon, Dong-uk Park,
“APPARATUS AND METHOD FOR EVALUATING LOAD CARRY CAPACITY OF BRIDGE”,
Application No. : 10-2017-0181320, Registration No. : 10-1966666
2. Jin-hwan Cheung, Hyoung-suk Choi, Dong-uk Park, Bub-gyu Jeon, Chi-young Jung,
“DEVICE AND METHOD FOR SEISMIC SAFETY ESTIMATION FOR INFRASTRUCTURES”,
Registration No. : 10-1903879.
3. Sung-wan Kim, Ki-Young Seo, Hyun-Jae Park, Bub-gyu Jeon, Dong-uk Park,
“APPARATUS AND METHOD FOR EVALUATING LOAD CARRY CAPACITY OF BRIDGE”,
Registration No. : 10-1966666
4. Chi-young Jung, Tae-ryeon Woo, Eun-rim Baek, Jin-hwan Cheung,
“METHOD FOR MEASURING SPATIAL INFORMATION USING INDEX LINE AND APPARATUS THEREOF”,
Registration No. : 10-1967554.
5. Chi-young Jung, Tae-ryeon Woo, Jong-han Lee, Jin-hwan Cheung,
“PRETENSION GIRDER AND CONSTRUCTION METHOD OF THE SAME”,
Application No. : 10-2017-0165777, Registration No. : 10-1946731
7. Chi-young Jung, Jong-han Lee, Tae-ryeon Woo, Jin-hwan Cheung,
“CONNECTION UNIT FOR MODULAR MEMBER AND CONSTRUCTION METHOD OF MODULAR STRUCTURE”,
Application No. : 10-2017-0124323, Registration No. : 10-2045121
8. Chi-young Jung, Jong-han Lee, Tae-ryeon Woo, Jin-hwan Cheung,
“CONNECTION UNIT FOR MODULAR MEMBER AND CONSTRUCTION METHOD OF MODULAR STRUCTURE“.
Application No. : 10-2017-0124423, Registration No. : 10-2055981
9. Chi-young Jung, Tae-ryeon Woo, Jong-han Lee, Jin-hwan Cheung,
“UNIT FOR REPAIRING/REINFORCING STRUCTURES”,
Application No. : 10-2017-0170669, Registration No. : 10-2055986
10. Hyoung-suk Choi, Dong-uk Park, Young-deuk Seo,
“APPARATUS AND METHOD FOR EVALUATING SAFETY OF BRIDGE”,
Application No. : 10-2017-0166850, Registration No. : 10-1983478
11. In-Tae Kim, Tae-Wan Kim,
“A COMBINATION OF HEAT-REDUCIBLE INORGANIC MATERIALS AND THEIR CURING METHODS TO QUICKLY DETERMINE THE DEGREE OF
DETERIORATION IN CONCRETE BUILDINGS CAUSED BY FIRE”,
Application No. : 10-2019-0032245
12. Sang-Ho Lee,
“SEISMIC WINDOW SYSTEM WITH ELASTIC SPRING AND STEEL DAMPER",
Registration No. : 10-1943572
2018
1. Jin-hwan Cheung, Sung-wan Kim, Bub-gyu Jeon,
“SYSTEM AND METHOD FOR MONITORING DEFLECTION OF CABLE BRIDGE”,
Application No. : 10-2016-0122947, Registration No. : 10-1850617.
2. Jin-hwan Cheung, Sung-wan Kim, Hyoung-suk Choi, Dong-uk Park, Eun-rim Baek,
“METHOD AND SYSTEM FOR MEASURING WATAR LEVEL OF LIQUID STORAGE TANKS”,
Application No. : 10-2016-0071592, Registration No. : 10-1873124.
3. Jin-hwan Cheung, Sung-wan Kim, Bub-gyu Jeon.
“SYSTEM AND METHOD FOR MEASURING TENSION OF CABLE BRIDGE”,
Application No. : 10-2016-0123834, Registration No. : 10-1886510.
4. Jin-hwan Cheung, Hyoung-suk Choi, Dong-uk Park, Bub-gyu Jeon, Chi-young Jung, Sung-wan Kim
“DEVICE AND METHOD FOR SEISMIC SAFETY ESTIMATION FOR INFRASTRUCTURES”,
Application No. : 10-2017-0021780, Registration No. : 10-190387
5. Sang-Ho Lee, Sang-Hoon Oh,
“DOUBLE SEISMIC HANGER SYSTEM FOR PIPING",
Registration No. : 10-1907104
6. Sang-Ho Lee,
“SEISMIC WINDOW SYSTEM WITH SEISMOLOGICAL SEPARATION STRUCTURE",
Registration No. : 10-1912350
2017
1. Nam-sik Kim, Chi-young Jung, Dong-uk Park,
“DEVICE AND METHOD FOR DISPLACEMENT EVALUATION OF BRIDGE”,
Application No. : 10-2016-0051198, Registration No. : 10-1785840
2016
1. Jae-Woong Kim, Sang-Hoon Oh, Sang-Ho Lee, Dong-Gun Kim, Jin-Oh Yoo
“WINDOW SYSTEM WITH IMPROVED HORIZONTAL SEISMIC PERFORMANCE”,
Registration No. : 10-1661079
2015
1. Jin-hwan Cheung, Hyoung-suk Choi, Dong-uk Park, Jae-bong Kim,
“A SYSTEM AND METHOD FOR DISTINGUISHING SEISMIC VIBRATIONS FROM OTHER VIBRATIONS”,
Application No. : 10-2013-0048971, Registration No. : 10-1504149
2. Sang-Ho Lee, Sang-Hoon Oh, Sung-Kee Yoon,
“SEISMIC MODULES THAT ACCOMMODATE VERTICAL AND HORIZONTAL DISPLACEMENTS AND SEISMIC SYSTEMS EQUIPPED WITH THEM”,
Registration No. : 10-1564375
2014
1. Jin-hwan Cheung, Hyoung-suk Choi, Dong-uk Park, Jae-bong Kim,
“VERTICAL DIRECTION VIBRATION REDUCING DEVICE”,
Application No. : 10-2013-0094136, Registration No. : 10-1479282
2. Sang-hoon Oh, Dong-kyu Lee, Hae-young Park,
“COUPLING STRUCTURE AND METHOD FOR BEAM TO COLUMN CONNECTION”,
Registration No. : 10-1406485.
3. Sang-hoon Oh, Hae-young Park,
“Stress balance Coupling structure for beam to column connection”, Registration No. : 10-1431657.
4. Nam-sik Kim, Sung-jin Chang,
“Bridge Weigh In Motion System Using Reaction Force of Supporting Points and Method for controlling the same”,
Application No. : 10-2012-0127767 Registration No.: 10-1366103
5. Sang-Ho Lee,
“DOUBLE-DOOR TYPE WATERPROOF DOOR UNIT WITH ASYMMETRIC STRUCTURE”,
Registration No.: 10-1373238
6. Sang-Ho Lee,
“WATERPROOF DOOR DEVICES AND THEIR CONSTRUCTION METHODS REINFORCED WITH CONNECTIONS TO BUILDINGS IN PREPARATION
FOR HIGH WATER PRESSURE”,
Registration No.: 10-1373240
7. Sang-Ho Lee,
“WATERPROOFING SYSTEM USING WATERPROOF SHEETS”,
Registration No.: 10-1395741
2013
1. Sang-hoon Oh, Hae-young Park,
“A device for coupling beam on column”, Registration No. : 10-1226766
2. Nam-sik Kim, Sung-wan Kim.
“Correction of Motion of Vision-based Measurement System Using a Fixed Object”,
Application No. : 10-2011-0122583, Registration No. : 10-1284219
3. Sang-hoon Oh, Hae-young Park,
“Coupling structure and method for beam to column connection”, Registration No. : 10-1344813
4. Nam-sik Kim, Sung-jin Chang,
“Bridge bearing with apparatus for measurement based on FBG sensor”,
Application No. : 10-2010-0109882, Registration No. : 10-1284221
5. Sang-Ho Lee,
“HINGE FOR WATERPROOF DOOR WITH YIELD DEFORMATION AND WATERPROOF DOOR STRUCTURE WITH IT”,
Registration No. : 10-1284732
6. Sang-Ho Lee, Jung-Han Lee, Byoung-Chul Park, Sang-Hoon Oh,
“SEISMIC RETROFIT STRUCTURE AND CONSTRUCTION METHOD FOR MASONRY BUILDINGS”,
Registration No. : 10-1293734
7. Sang-Ho Lee,
“ROLLER MODULES THAT ALLOW DISPLACEMENT OF THE AXIS OF ROTATION AND SLIDING TYPE WATERPROOF DOOR DEVICES EQUIPPED
WITH THEM”,
Registration No. : 10-1297715
8. Sang-Ho Lee, Sang-Hoon Oh,
“SEISMIC STEEL STRUCTURE OF PILOTI STRUCTURES”,
Registration No. : 10-1301143
2012
1. Nam-sik Kim, Sung-jin Chang
“Apparatus for measurement based on FBG sensor and bridge bearing thereof”,
Application No. : 10-2010-0109891, Registration No. : 10-1209939
2. Sang-Hoon Oh, Hong-Sik Ryu, Sang-Ho Lee,
“ENERGY ABSORBING DEVICE FOR SEISMIC ISOLATION”,
Registration No. : 10-1129479
3. Sang-Ho Lee, Sang-Hoon Oh,
“INTEGRATED WINDOW SYSTEM WITH SEISMIC PERFORMANCE”,
Registration No. : 10-1161785
2011
1. Sang-Ho Lee, Sang-Hoon Oh,
“CONSTRUCTION METHOD OF REINFORCEMENT PANEL FOR BUILDING WALLS AND REINFORCEMENT STRUCTURE OF BUILDING WALLS USING
REINFORCEMENT PANEL”,
Registration No. : 10-1056237
2. Sang-Ho Lee, Hyuk-Gee Yun, Hae-Young Park,
“CONSTRUCTION METHOD OF HOLLOW SECTION SLAB USING FIXED REINFORCEMENT AND ITS APPLICATION”,
Registration No. : 10-1068451
3. Sang-Ho Lee, Jin-Sam Park, Tae-Sang Ahn, Jung-Hyun Hwang, Sang-Hoon Oh,
“SEISMIC DAMPER USING INTERLAYER DEFORMATION OF LAMEN FRAME”,
Registration No. : 10-1069479
2010
1. Sang-Ho Lee, Nam-Su Kim, Chang-Kyu Lee,
“EPOXY MORTAR PANEL FOR SHEAR REINFORCEMENT WITH STEEL FIBER AND ITS FABRICATION METHOD”,
Registration No. : 10-0985255
2. Sang-Ho Lee, Sang-Hoon Oh,
“WINDOW SYSTEM WITH SEISMIC PERFORMANCE”,
Registration No. : 10-1000206